Regular bearing maintenance must be a really good job

Regular bearing maintenance must be a really good job
Through appropriate periodic inspection, so that early detection of failures,Plastic bearingprevent accidents in the first place, to improve productivity and economy is very important.
1 Cleaning:
Check the slide bearings removed, first with photography and other methods to make the appearance of records. In addition, to confirm the remaining amount of lubricant and lubricant sampling, and then cleaning bearings.
a, bearing coarse washing and cleaning points for sperm washing, and placed in the bottom of the container used in the metal grid.
b, coarse wash, brush, etc. used in the oil or grease removal adhesive material. If the turning point in the oil bearing, note damage due to foreign bodies such as rolling surface.
c, sperm washing, in the oil slowly rotating bearings should be carefully carried out.
Commonly used cleaning agents for the neutral water-free diesel or kerosene, is sometimes necessary to use warm lye. No matter what kind of cleaning agent used, filter should always be kept clean.
After washing, anti-rust coating on the immediately bearing grease oil or rust.
2, check with the judge:
In order to determine whether the re-use the bearings removed, check its size to focus on accuracy, precision rotation, internal clearance and with the surface, raceway, cage and ring and so on.
On the test results, may be proficient with a bearing or bearings are used to judge.
Determine the mechanical properties and according to the standards and inspection period and other important degrees vary. If the following damage, the bearings must not be reused, must be replaced.
1) bearing parts of the fracture and defects.
2) The raceway surface of the strip rolling objects.